Quectel L76 GPS receiver with Antenna

 

Quectel L76 GPS receiver with Antenna is a concurrent receiver GNSS module in small formfactor with 33 tracking channels, 99 acquisition channels, and 210 PRN channels. The L76 can acquire and track any mix of 3 multiple satellite constellations, providing simultaneous GPS, GLONASS, BeiDou, Galileo and QZSS open service L1 reception capability. This increases the number of visible satellites and reduces time-to-first-fix, allowing accurate navigation in settings such as urban canyons.

The L76 combines EASY™ (Embedded Assist System for self-generated orbit prediction) with LOCUS™ (internal logger) and AlwaysLocate™ to achieve excellent accuracy with low power consumption. EASY™ allows the module to calculate and predict orbits automatically using up to 3 days of ephemeris data stored in the RAM, so it can fix position quickly and with low power consumption, even when signal levels are lower. LOCUS™ allows the module to log position information to the internal flash memory at default intervals of 15 seconds, typically providing more than 16 hours log capacity without extra cost. AlwaysLocate™ allows the L76 to adjust the on/off time adaptively to achieve balance between positioning accuracy and power consumption, according to environmental and motion conditions.

Features of Quectel L76 GPS receiver with Antenna:

  • Supports SBAS (WAAS/ EGNOS/ MSAS/ GAGAN)
  • Supports EASY™
  • Ultra-low tracking power consumption (18mA)
  • Supports AlwaysLocate™
  • Supports LOCUS™
  • High sensitivity: -165dBm during tracking, -148dBm during acquisition
  • Balloon mode enables altitude of up to 80km
  • Multi-tone active interference canceller for anti-jamming
  • PPS VS. NMEA can be used for time service
  • Operating voltage: 7V to 12V dc.
  • Compatible with TTL & serial.
  • NMEA Protocol
  • 9600 baudrate

Click here to buy other GPS devices:

Purchase Link:

https://www.graylogix.in/product/quectel-l76-gps-receiver-module-with-antenna






Comments

Post a Comment

Popular posts from this blog

Maxgain USB GPS Receiver for Android

Image
  MAXGAIN MG100 USB GPS Receiver from Graylogix is a high-performance L1 GNSS positioning module with antenna built-in, which is developed on the base of the state-of-the-art manufacturing unit. It supports global civil navigation systems, including GPS, BDS, GLONASS, Galileo, and QZSS. Featured with SAW and LNA, it achieves high positioning accuracy and short TTFF, especially in a rough urban environment. It has an LED to indicate the 3D fix of the satellites. With a compact body and high performance, MAXGAIN MG100 is widely applied to tracking applications, like automotive, consumer, and industrial tracking, Live date and time. Etc. Features of Maxgain USB GPS Receiver Supports GPS, BDS, Galileo, GLONASS, and QZSS systems Built-in LNA & SAW for better sensitivity Supports A-GNSS Supports geo-fence function Ultra-low power consumption around 13 mA in tracking mode Supports antenna supervision. Specifications of USB GPS Receiver GNSS tracking channels: 72 channels GPS/QZSS: L1C...
Read more

EC200 USB modem for Raspberry PI and IOT applications.

Image
  Purchase link: 🔗 https://www.graylogix.in/product/quectel-ec200u-4g-lte-usb-modem The Quectel EC200U is a standalone, USB-powered 4G LTE modem designed for data communication. ​ Key Features: ​ Connectivity: It's an LTE Cat 1 module, supporting a maximum of 10 Mbps downlink and 5 Mbps uplink. It also has fallback for GSM/GPRS networks. ​ Interface: It uses a standard Micro USB 2.0 port for both power and data, making it a simple plug-and-play device. ​ Plug-and-Play: The device is designed for ease of use, with drivers available for Windows, Linux, Android, and specifically Raspberry Pi . ​ Design: It's a small form-factor device intended for industrial use. It includes a built-in SIM card holder and 3 LED indicators for Power, Status, and Network. ​ Antenna: It comes with a "GL Maxgain 4G Sticker Antenna" which suggests a focus on good signal reception. ​ Control: It works on industry-standard AT commands , which is a common and flexible way to con...
Read more

Quectel EC200U-CN TTL Modem With GPS

Image
  Quectel EC200U-CN TTL Modem With GPS Quectel has launched the latest LTE Cat 1 wireless communication module, Quectel EC200UCNAA-N05-SGNSA, with GPS. It supports a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps. It also supports standard Mini PCIe package to meet the application requirements of products in different industries. The laser carving process is adopted by the EC200U-CN, which improves its appearance, enhances its metal texture, increases heat dissipation, makes information less prone to erasure, and better meets automation demands EC200U-CN has built-in rich network protocols, integrates multiple industry standard interfaces, and supports multiple drivers and software functions (for Windows 7/8/8.1/10, Linux and Android operating systems such as USB drivers), which greatly expands its application scope in the M2M field, such as POS, POC, ETC, sharing, data card, energy control, security, industrial PDA, etc. Features of Quectel EC200U-CN TTL Mode...
Read more